Inexpensive vacuum tables for holding sheet materials

These vacuum tables are ideal for budget conscious users. They can be connected to a regular ShopVac or other dust collection system to hold a variety of parts without further mechanical clamping. They are particularly good for sheet goods of many kinds.

The white plastic top can be surfaced with a fly cutter for ultimate flatness.

A rubber mat that lets air through is provided as a sacrificial layer when cutting through your stock.
 

Advantages of this vacuum clamping technology

• Reduce the time for clamping sheets by 70%-90%
• Vibration-free clamping of thin and elastic materials - equal holding force across the entire surface
• Easy assembly and handling.
• 6mm bore holes with C-C 10mm across the vacuum table surface.
• Use locating pins for batch/mass production
• High clamping force per square meter through 6mm holes
• vacuum connectors on all sides so you can connect several tables together

What's included

• Sacrificial rubber mat that also provides 30% better adhesion by increasing horizontal friction.
• Shop vac connector
• Connecting hoses
• A4 Special film for covering unused working surface
• 4 x pins 6x14mm and4 x pins 6x18mm

What else do you need?

You need a vacuum source. Many people use a Shop vac, a central vacuum system, a compressor with a venturi adapter, or a vacuum pump.

Learn more about vacuum clamping systems in general from CNCCookbook.

VACUUM TABLES

• Reduce setup time by 70-90%
• Form stable design
• Max flow design
• Connect several tables together
• Easy setup
• Great price
• Quality - Made in Germany
   

Sizes

• 220 x 320 mm
• 300 x 400 mm
• 300 x 450 mm
• 300 x 600 mm
• 400 x 600 mm
• 400 x 700 mm
• 400 x 1000 mm
• 600 x 1000 mm
• 1000 x 1000 mm
• 1500 x 1000 mm